Bunsen Burners

Ideal heavy-duty burners for bulk frying and general heating requirements of hotels, restaurants, canteens, messes. cafeteria & various industries and pharmaceuticals, produce powerful torch type blue flames. Available in five capacities. These burners are recommended to be used at a pressure of 320 to 490 gm/cm² (4.5 psig), however, this may be varied by ± 5%; the heat output being varied accordingly. These burners are also termed as T-22 or T-1 and T-35 or T-2. T-65 or T-3, T-50, T-78, T-100 Also available.

Cross section of torch type burner model

T-22 or T-1 and T-35 or T-2 Burner

Specifications:

Operating pressure (Variable: 320 to 490 gm/cm² : (4.57 psig)

	T-22 or T-1 Burner	T-35 or T-2 Burner
Consumption Per Hour	0.9Kg	1.58Kg
		1.58 to 1.97
Btu/Hr Rated heat output	40,000	73,000
Diameter of Burner Head	62mm	82mm
Height (Adjustable)	220 to 240mm	235 to 275mm

Connection: 3/8" Cu Male Inlet

 

Most appropriate for heavy heating requirements of commercial cooking and industries: general & pharmaceuticals and dairy. Produces lovely blue sunflower shaped flame; available in two capacities. These burners are recommended to be used at a pressure of 320 gm/cm2 (4. 5 psig), however this may be varied by ± 25%; the heat output being varied accordingly.
these burners are also known as m-22 or m-1 and m-35 or m-2 . Also available in model m50, m78

Cross section of ring type burner model m-35
Specifications: operation pressure: 320 gm/cm² (4. 5 psig)

	m-1 burner	m-2 burner
Consumption k cals/hr	11,700	18,550
(kg/hr)	1. 0	1. 58
BTU/hr rated heat output	46,000	73,000
Diameter of burner head	60mm	80mm
Height (adjustable)	235 to 275mm	260 to 280mm

connection 3/8? Bspm compression inlet burners in this model

These burners are recommended to be used at 320 to 490 gm/cm2 (4.5 psig), however this may be increased by 50%; the heat output being varied accordingly.

(High heat output, flame spreading ring, burner)

Specifications:

Model No.	Dimensions						Optimum Working Pressure		Consumption Per Hour		Rated Heat Output
	Length		Height		Head Diameter
	mm	inch	mm	inch	mm	inch	kg/cm2	psig	kgs	lbs	kcal/hr	btu/hr
M-100	530	20.87	220	8.66	166	6.54	0.3	4.5	4.5	10.0	50,400	2,00,000
M-140	530	20.87	230	9.00	166	6.54	0.3	4.5	6.3	14.0	70,560	2,80,500

 

Burner model nos. RV-1 FEET (300 MM), RV-15" (375 MM), RV-1.5 FEET (450 MM), RV-2 FEET (600 MM), RV-2.5 FEET (750 MM), RV-3 FEET (900 MM) RV-4 (1200) ideal for use in Hotels and Restaurant, under the hot plate for preparation of pancakes, hamburgers, dosa, omelettes, chapatis, etc. Useful for hot cases, drying ovens in Industries, Factory for heating process, bain maries and tin bath heating in industries. Produces two/one/three/four as per required linear flames with wider heat distribution. Flame stability, increased efficiency and long life ensured by stainless steel corrugated ribbons. Available in different sizes providing different flame lengths.

Specifications:
Rated operation pressure: 320 to 490 gm/cm2 (4. 5 psig)
connection 3/8" BSP OR any size inlet. The above burners are available in side, center, elbow, straight models. All in two ribbons and single ribbon or as per requirement,  Also available in pencil models.

Dimensions						optimum working pressure		consumption per hour		rated heat output
Length		width		height
MM	ins	mm	ins	mm	ins	kg/cm2	psig	kgs	lbs	kcal/hr	btu/hr
483	19. 0	127	5. 0	76	3. 0	0. 035	0. 5	0. 38	0. 85	4,280	17,000

Gas operated infra red radiant burners (can be adapted to radiant heat if required). Industrial uses include brooding, curing, drying, food processing, almost all purposes where metal fabricating and finishing, textile drying and weld pre-heating. Also available in longer length. This item is also available in as per customer requirement .

Ideal for tea stalls, snackbars, pavbhaji. Sturdy cast iron body fitted with adjustable screws for supporting utensils of various shapes. Control tap with safety push-in arrangement.

Specifications:
Operation pressure : 30gms/cm2
Consumption : 5300 k cal/hr (450 gms/hr)
Connection : nozzle to suit 6. 4 mm tube
Also available in 4 legs.

 

Model no.	Dimensions								Optimum Working Pressure
	Length				Diameter
	mm		ins		mm		ins		kg/cm2		psig
B-1		150		6.0		80		3		0.035		0.5
B-2		150		6.0		80		3		0.035		0.5

Bunsen Burner (With Nozzle Or With Tap)

•  Ideal for use in Laboratories - Educational Research and Pathological Laboratories.
•  Most suitable to keep liquids boiling in urns, kettles etc.
•  Flame can be controlled by a tap installed in the line or installed on the burner.
•  Heavy metal base prevents toppling.
•  Brass burner tube warrants long life. Also available in stainless steel tube and base.
•  Attractive electroplated finish prevents corrosion due to fumes.
•  Available in two sizes.

 

Model Nos.
PL-1 (low pressure)
PL-2 (high pressure)

 

Model no.	Dimensions				Optimum Working Pressure		Consumption Per Hour		Rated Heat Output
	Length		Diameter
	mm	ins	mm	ins	kg/cm2	psig	kgs	lbs	kcal/hr	btu/hr
PL-1	92	3.62	16	0.63	0.035	0.5	0.043	0.094	480	1,895
PL-2	92	3.62	16	0.63	0.3	4.5	0.400	0.950	4500	17,765